The Enlaps Mounting Kit provides you with wider installation options for the Tikee arm through a complete mounting kit that supports installation on walls, concrete, wooden structures, and multi-shaped structures, allowing you to set up your shooting location quickly and securely.
Features of the Enlaps Mounting Kit A practical solution within photography tools to expand the installation options for the Tikee arm on various surfaces, including hollow or solid walls. Adjustable metal clamps to secure the arm on circular, rectangular, triangular, or polygonal structures with a maximum circumference of 1099 mm and a maximum diameter of 350 mm. Rubber strips to protect the supporting surface under the clamps and reduce slipping, which can be cut as needed. Includes a bubble level to facilitate leveling during installation for a more precise setup. Clear and visible content for the kit includes long metal clamps with a tension mechanism, screws, plugs, and washers, making it a suitable addition to professional photography equipment.
Specifications of the Enlaps Mounting Kit Compatibility: Designed for mounting the Tikee arm. Plugs: 4 UX plugs sized 6×35 for installation in concrete and hollow or solid walls. Screws: 4 wood screws 4×20 for installation on wooden structures. Washers: 4 M4 washers to improve pressure distribution and connection stability. Level: 1 bubble level for leveling during installation. Metal clamps: 2 adjustable metal clamps, maximum diameter 350 mm, and maximum circumference 1099 mm. Rubber strips: 2 protective rubber strips, thickness 2 mm, length 1099 mm, width 20 mm. Non-included installation requirements: Drill with a 6 mm bit for installing plugs, a Phillips or Pozidriv screwdriver for tightening screws, and clamps can be tightened with a flat or Phillips screwdriver or a 7 mm wrench.
